没有什么能比第一眼看到“她”更让人激动的了!Volvo 8x8是一台为“机械控”设计高品质遥控车辆模型!它的结构和真车相似,主体结构用料为全金属材料,拥有如真车一样的大梁、减震和传动装置,甚至连自卸装置也采用了5级油缸液压举升器,理论推力可达400kg,耐压5MPA。Volvo 8x8为8轮全驱结构,采用仿真减速桥外观设计,含有差速器和差速锁,并且差速锁是可以遥控的,提升了车辆的通过性。“油箱”采用阳极氧化亮银处理,内部存放了液压油,是真正有功能的装置,并非一般装饰零件,以假乱真的造型使这台车更加逼真!
本车在国外RC4WD零售价:US$2799.99
Volvo 8x8的主要特性:
驱动电压:3S锂电供电(需自备)
声音组:仿真3T声组
尺寸:690mm x 186mm x 262.5mm(长、宽、高)
比例:1/14
重量:8.9kg
载重:15kg
载重总质量:24.5kg
搭配6通道遥控器(FS-CT6B)
成品出货,到手可玩(RTR)
动力强劲,负载15kg,爬45度陡坡不费力
操作步骤:
1. 打开遥控器(遥控器的旋钮和右手的摇杆要处于中间位置/遥控器为美国手)
2. 接主车电源,等待4声信号确认完毕后方可操作(大概5秒内),如果提前操作很有可能使电调进入设置模式。
出货配置:
1x 1/14全金属8轮全驱液压自卸车(成品)
1x 6通道遥控器
需自备以下材料:
3S锂电池(11.1V/2200-2600mAh/XT60插头)
锂电池充电器
发射机电池
Armageddon is one of the most powerful R/C hydraulic dump truck available today. Highly detailed base on European style dump truck. Engineered specifically for the tough demands of transporting gravel, sand, asphalt, snow, wood chips or rocks. Created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to work! Massive power through 1000kV high speed brushless system.
-
Hard plastic European style front Cab
-
Full metal 2 speed transmission (Planetary gears)
-
European style V shape dumper
-
Full electronic sound system (engine start, idle and more)
-
Transfer case (billet alum)
-
Scale fuel tank (billet alum)
-
Super scaled leaf spring suspension setup
-
Scale rims (billet alum)
-
Remote lockable rear axle (locking differential)
-
Full metal front and rear axle housing
-
Steel scale drive shaft
-
Realism front cab latch
-
Retractable steel ladder
-
Molded functional fuel tank (filled with hydraulic oil)
-
Automatic trailer gate (do not attempt to open it by hand)
-
Retractable steel ladder
-
Rear light guard (protect against rock)
-
Scale light bucket (fit 3-5mm LED)
-
Recommended payload: 16kg/35lbs
-
Maximum lift power: 42kg/92lbs
-
Fully painted
-
Scale fire extinguishers and spare wheel/tire
-
Cylinder maximum thrust: 109kg/231 lbs
-
Brushed driven motor
-
1000kV Brushless motor-driven micro hydraulic pump
-
Length: 687mm/27inch
-
Width: 186mm/7.3inch
-
Height: 262mm/10.3inch
-
Weight: 8kg/17lbs
-
Theoretical load: 15kg/33lbs
-
Load total mass: 23kg/50lbs
-
First gear 1:16, second gear 1:4 (Transmission)
-
Basic 6 channel 2.4Ghz radio
-
Basic 60T 540 motor
-
This product is professionally pre-assembled